Product Description:

YJJ CS200YT5 Conventional Low-Voltage Electrical Current Sensor

Features:

CS200YT5 is a current sensor based on the Hall effect principle. The main parameters are as follows:
Electrical parameters
‌Primary rated input current‌: 200A
‌Measurement range‌: 0 to ±400A (AC/DC/Pulse and other irregular waveforms)
Rated output voltage on the secondary side: 1V ± 1%
Power supply voltage: +5V ± 5%
Current consumption: < 20mA
Insulation voltage: 2.5kV (between the primary and secondary sides)
Performance indicators
Linearity: < 1%
Zero offset voltage: 2.5V ± 1%
Temperature drift: ≤ ±0.5mV/℃ (TA = 25℃)
Response time: ≤ 3μs
Bandwidth: DC ~ 20kHz
Application Characteristics
‌Operating Temperature‌: -25℃ to +85℃
‌Storage Temperature‌: -40℃ to +100℃
‌Load Resistance‌: ≥ 10KΩ
‌Dimensions‌: 41mm (For specific dimensions, please refer to the product manual)
Connection Instructions
Power Supply: +5V → 1, GND → 2, VOUT → 3, Reference Voltage 2.5V → 4
Pin functions: 1 (+5V), 2 (GND), 3 (signal output), 4 (reference output)
This sensor is applicable to power, industrial control and scenarios requiring electrical isolation for measurement. It can be customized with different input currents and output voltages.

Specifications:

Yijiajie Electronics is a full range of silicon pressure sensors from the United States, FREESCALE/, GE, MEAS, SMI, and a full range of sensing and control products from the United States pressure, temperature and humidity, gas flow, current, Hall effect, etc., Japan HAMAMATSU flame, UV sensors, photodiodes, Japan FIGARO, UK CITY, ALPHASENSE full range of semiconductors, catalytic, electrochemical gas sensors, French HUMIREL/MEAS humidity sensors and other international well-known companies authorized agents or distributors, to provide customers with product information, products Solutions, product selection, supply guarantee and logistics services, etc.