Product Description:
SSCMNNN030PA2A3 Indoor Air Pressure Control Digital I2C Absolute
Pressure 200Kpa Pressure Sensor
Features:
Circuit board installs the TruStability? SSC series compensating
pressure sensor with a range of ±2% FSS to ±4% FSS TEB. ***
(Differential pressure, gauge pressure), low (absolute pressure,
differential pressure, gauge pressure). Digital or analog output.
DIP, SIP, SMT
Pressure range
±1.6 mbar to ±10 bar, ±160 Pa to ±1 MPa, ±0.5 inH2O to ±150 psi
The TruStability standard accuracy silicon ceramic (SSC) series is
a piezoresistive silicon pressure sensor that offers proportional
analog output or digital output, enabling the provision of pressure
readings within the specified full-scale pressure range and
temperature range.
The SSC series can perform comprehensive calibration and
temperature compensation for sensor zero position, sensitivity,
temperature coefficient and non-linearity using the dedicated
integrated circuits on the circuit board. The calibrated analog
output values and digital output values are updated at rates of
approximately 1 kHz and 2 kHz respectively.
The SSC series can be calibrated within a temperature range of
-20°C to 85°C [ -4°F to 185°F ]. This sensor is characterized by
its ability to operate under a single power supply of 3.3 Vdc or
5.0 Vdc.
These sensors can measure absolute pressure, gauge pressure or
differential pressure. The absolute pressure type sensor uses
vacuum pressure as the internal reference value, and its output
value is proportional to the absolute pressure. The gauge pressure
type sensor uses atmospheric pressure as the reference and provides
an output value that is proportional to the difference from
atmospheric pressure. The differential pressure sensor can measure
the pressure between the two pressure ports.
TruStability? The pressure sensors are designed to be used in
conjunction with non-corrosive and non-ionized gases, such as air
and other dry gases. Through a wide range of options, the
performance of these sensors can be extended to pressure ranges
higher than 40 mbar, 4 kPa, and 20 inH2O.
Pressure type: Absolute
Work pressure range: 0 psi to 30 psi
Accuracy: 0.25 %
Output type: Digital
Installation style: SMD/SMT
Interface type: I2C
Operating power supply voltage: 3 V
Port type: Manifold
Resolution: 12 bit
Package / Housing: SMT-8
Minimum operating temperature: -40 °C
Maximum operating temperature: +85 °C
Series: SSC
Package: Bulk
Working power current: 1.6 mA
Product type: Board Mount Pressure Sensors 50
Subcategory: Sensors
Maximum power supply voltage: 3.3 V
Minimum power supply voltage: 3 V
Trademark name: TruStability
Unit weight: 3.200 g
Specifications:
| Working power current | 1.6 mA |
| Subcategory | Sensors |
| Maximum power supply voltage | 3.3 V |
| Minimum power supply voltage | 3 V |
