Product Description:

LOX-TRACE-1000-BLX Is A Fluorescent Micro-oxygen Transmitter That Can Be Exposed To Any Oxygen Concentration Environment

Features:

Product Introduction

I. Product Features of the British SST fluorescent trace oxygen transmitter LOX-TRACE-1000-BLX that can be exposed to any oxygen concentration environment:

It can operate at any oxygen concentration without damaging the sensor

2. It has a high degree of selectivity and sensitivity to oxygen

3. Long-life, non-consumable technology - no need to be stored in an inert gas environment, low power consumption, and high precision

4. Fast response speed and short purification time

5. It is directly connected to the controller via the RS485 interface

6. Factory Calibration - Users can calibrate by themselves

Ii. Product advantages of the British SST fluorescent trace oxygen transmitter LOX-TRACE-1000-BLX that can be exposed to any oxygen concentration environment:

1. Compact in size, with a flowable shell and a sealed base

2. It contains no harmful substances and complies with RoHS & REACH

3. Insensitive to pressure fluctuations

4. It can be used in vacuum applications

Iii. Electrical and Environmental Characteristics of the British SST fluorescent trace oxygen transmitter LOX-TRACE-1000-BLX that can be exposed to any oxygen concentration environment:

Supply voltage (Vs) : 8-30Vdc

Supply current (Is) <30mA, <60mA (peak)

Output type: RS485 Modbus RTU

Operating temperature: -10℃ to +40℃

Storage temperature: -30℃ to +50℃

Humidity, dryness and clean gas

The atmospheric pressure range is 260 to 1260mbar

Iv. Performance Parameters of the British SST fluorescent trace oxygen transmitter LOX-TRACE-1000-BLX that can be exposed to any oxygen concentration environment:

Oxygen measurement range: 0- 1000 ppm (Vol), 0-1.2mbar (ppO2)

Response time T90 <30 seconds (typical value), purification time ≤30 minutes

Accuracy/resolution <2%FS/1ubar

The temperature accuracy/resolution is for reference only /0.1℃

Pressure accuracy/resolution ± 5mbar/1mbar (Lox-02)

O2% accuracy/resolution is determined by ppO2 and pressure accuracy /1ppm

Lifespan >5 years

Specifications:

Yijiajie Electronics is a full range of silicon pressure sensors from the United States, FREESCALE/, GE, MEAS, SMI, and a full range of sensing and control products from the United States pressure, temperature and humidity, gas flow, current, Hall effect, etc., Japan HAMAMATSU flame, UV sensors, photodiodes, Japan FIGARO, UK CITY, ALPHASENSE full range of semiconductors, catalytic, electrochemical gas sensors, French HUMIREL/MEAS humidity sensors and other international well-known companies authorized agents or distributors, to provide customers with product information, products Solutions, product selection, supply guarantee and logistics services, etc.