Product Description:
FSP1000-50-EV-U Digital Micro-Differential Pressure Sensor Has An
Selectable Range
Features:
I. Features of the Siargo Digital Differential Pressure Sensor
FSP1000 series from the United States:
The sensor has high sensitivity and an extremely small starting
flow rate
Fast response speed
Low voltage loss
Easy to install
Ii. Selection of Siargo Digital Differential Pressure Sensor
FSP1000 Series Products from the United States:
FSP1000: Output (E-I 2C; V- Analog voltage Optional E and EV
Pressure difference range (optional 250 and 500)
The unit of the pressure difference range is Pa. For example, 250
represents a pressure difference of. ±250Pa
The standard output of the sensor is IC, and the analog voltage
output is an option.
Iii. Technical Parameters of Siargo Digital Differential Pressure
Sensor FSP1000 Series from the United States:
The pressure difference range is ±250, ±500 Pa
± 1.0, ± 2.0 i nch H O.
Working power supply: 3.0-3.6 Vdc
Output mode: Linear, IC/analog voltage (optional)
With
The analog output range is 0.4 to 2.4 Vdc
The digital output resolution is 12 bitt
The IC clock frequency is 100 kH z
The IC address is read as 0xa1 and written as 0xa0
Five-pin electrical interface, 2.54m
The response time is 5 ms
The flow resistance is less than 95m l/m im @ 500Pa
Accuracy ±(2.0 + 0.2 FS) %
Repeatability: ± 0.5%
Temperature drift < 0.3% / 10℃
Operating temperature: -5 to +65 ℃
Zero drift ± 0.5 Pa
Zero point stability ± 0.1 Pa/ year
Zero-point repeatability ± 0.1 Pa
Altitude has no effect (fully compensated)
Storage temperature: -40 to +85 ℃
The working pressure is 0.2 MPa
Operating humidity: 0-100 (no freezing, no condensation) % RH
The preheating time is 50 m sec
Vibration standard: 20g; M I L-STD -883E, M et
hod 2002. 4.
Conformity RoH S and REAC H
Shenzhen Yijiajie Electronic Technology Co., Ltd. mainly serves OEM
manufacturers in the sales of sensor products. In the field of
sensing and control products, we provide product sales and
technical support services in China for globally renowned
manufacturers. We are also currently a professional supplier of
sensing and control products in China and Hong Kong. The head
office was founded in Hong Kong in 2002. The Shenzhen company is
located at the intersection of Shennan Middle Road and Huaqiang
North Road in Shenzhen. Meanwhile, the company has a large amount
of spot inventory in Shenzhen and Hong Kong and can place orders
directly from abroad with prompt delivery. We hope to cooperate
with domestic related manufacturers to provide your company with
high-quality and satisfactory products and make your products more
competitive. We sincerely look forward to cooperating with you.
Specifications:
| Repeatability | ± 0.5% |
| Temperature drift | < 0.3% / 10℃ |
| Operating temperature | -5 to +65 ℃ |
| Zero drift | ± 0.5 Pa |
